HPHT 101-What Petroleum Engineers and Geoscientists Should Know About High Pressure High Temperature Wells Environment

Arash Shadravan, Mahmood Amani

Abstract


On April 20, 2010, BP’s Deepwater Horizon oil rig exploded in the Gulf of Mexico. This turned out to be one of the worst environmental disasters in recent history. This high-profile blowout at the Macondo well in the Gulf of Mexico, brought the challenges and the risks of drilling into high-pressure, high-temperature (HPHT) fields increasingly into focus. New Technology, HSE regulations, new standards, such as newly recommended procedures by the American Petroleum Institute (API), and extensive training programs for the drilling crew seem to be vital in developing HPHT resources.  High-pressure high-temperature fields exist in Gulf of Mexico, North Sea, Southeast Asia, Africa and the Middle East. Almost a quarter of HPHT operations worldwide are expected to happen in the American continent particularly in North America. Major oil companies have tried to identify key challenges in HPHT development and production, and several service companies have offered many insights regarding current or planned technologies to meet these challenges. However, there are so many factors that need to be addressed and learned in order to safely overcome the challenges of drilling into and producing from HPHT oil and gas wells.Drilling into HPHT wells is a new frontier for the oil and gas industry. The growing demand for oil and gas throughout the world is driving the exploration and production industry to look for new resources. Some of these resources are located in deeper formations. According to US Minerals Management Service (MMS), over 50% of proven oil and gas reserves in the US lie below 14,000 ft. subsea. As we drill into deeper formations we will experience higher pressures and temperatures.Drilling operations in such high pressure and high temperature environments can be very challenging. Therefore, companies are compelled to meet or exceed a vast array of technical limitations as well as environmental, health and safety standards.  This paper explains the technological challenges in developing HPHT fields, deepwater drilling, completions and production considering the reports from the Bureau of Ocean Energy Management, Regulation and Enforcement (BOEMRE), formerly known as the Minerals Management Service (MMS). It reviews the HPHT related priorities of National Energy Technology Laboratory (NETL), operated by the US Department of Energy (DOE), and DeepStar Committees for Technology Development for Deepwater Research.

Keywords


High pressure high temperature wells environment, Oil and gas industry, Gulf of Mexico

Full Text:

PDF

References


[1] Al-yami, A.S., & Schubert, J. (2012). Using Bayesian Network to Model Drilling Fluids Practices in Saudi Arabia. Paper SPE -152096-MS presented at SPE International Production and Operations Conference & Exhibition, Doha, Qatar, 14-16 May 2012.

[2] Al-yami, A.S., Yuan, Z., & Schubert, J. (2012). Failure Probability with Time Under Different Operational Conditions for Low-Density System Based on Hollow Microspheres Supported by Long Term Lab Studies and Field Cases. Paper SPE-159141-MS presented at SPE Asia Pacific Oil and Gas Conference and Exhibition, Perth, Australia, 22-24 October 2012.

[3] Alfi, M., Silva, P.D., & Barrufet, M. et al. (2012). Electron-Induced Chain Reactions of Heavy Petroleum Fluids-Dominant Process Variables. Paper SPE-157882-MS presented at SPE Heavy Oil Conference Canada, Calgary, Alberta, Canada, 12-14 June 2012.

[4] Alfi, M., Silva, P.D., & Barrufet, M. et al. (2012). Utilization of Charged Particles as an Efficient Way To Improve Rheological Properties of Heavy Asphaltic Petroleum Fluids. Paper SPE-153528-MS presented at SPE Latin America and Caribbean Petroleum Engineering Conference, Mexico City, Mexico, 16-18 April 2012.

[5] Amani, M. (2012). The Rheological Properties of Oil-Based Mud Under High Pressure and High Temperature Conditions. Advances in Petroleum Exploration and Development, 3(2), 21-30.

[6] Amani, M., & Al-Jubouri, M. (2012). The Effect of High Pressures and High Temperatures on the Properties of Water Based Drilling Fluids. Energy Science and Technology, 4(1), 27-33.

[7] Amani, M., & Al-Jubouri, M.J. (2012). An Experimental Investigation of the The Effects of Ultra High Pressures and Temperatures on the Rheological Properties of Water-Based Drilling Fluids. Paper SPE-157219-MS presented at International Conference on Health, Safety and Environment in Oil and Gas Exploration and Production, Perth, Australia, 11-13 September 2012.

[8] Anna, D. ( 2006). DOE Selects Projects Targeting Deep Natural Gas Resources, Research Focuses on High-Tech Solutions to High Temperature, Pressure Challenges. Retrieved from http://www.netl.doe.gov/publications/press/2006/06036-Deep_Drilling_Technology_Awards.html

[9] CBI Conference Centre. (2012). 8th Annual HPHT Wells Summits, London, UK. Retrieved from http://www.hphtwells.com/Event.aspx?id=777792

[10] Wray, B., Bedford, D., Leotaud, L., & Hunter, B. (2009). Case Studies: High-Density Elastic Cements Applied to Solve HPHT Challenges in South Texas. Completing the Well, Innovating While Drilling, 11/12.

[11] Bergerot, J.L. (2012). Technologie Forage – Puits HPHT. Retrieved from http://aftp.ecritel.net/_upload/ressources/programme_conferences/gep_aftp_spe_08_02_2012.pdf

[12] Colwell, C., Crenshaw, J., &Bland, B. (2011). Haynesville Drilling Challenges Addressed Through MPD. World Oil, 232(10), 47-54.

[13] Bottazzi, F. , Pichierri, G. , & Verga, F. (2007). Subsea Well Testing in HPHT Conditions, San Donato Milanese. Retrieved from http://areeweb.polito.it/ricerca/petroleum/presentazioni/0607/Subsea%20Well%20Testing%20in%20HPHT_Pichierri_COMP.pdf

[14] Davani, E., Kegang, L., & Teodoriu, C. et al. (2009). Inaccurate Gas Viscosity at HP/HT Conditions and its Effect on Unconventional Gas Reserves Estimation. Paper SPE-122827-MS presented at Latin American and Caribbean Petroleum Engineering Conference, Cartagena de Indias, Colombia, 31 May-3 June 2009.

[15] Davani, E., Ling, K., & Teodoriu, C. et al. 2009. More Accurate Gas Viscosity Correlation for Use at HPHT Conditions Ensures Better Reserves Estimation. Paper SPE-124734-MS presented at SPE Annual Technical Conference and Exhibition, New Orleans, Louisiana, 4-7 October 2009.

[16] Department of Energy. (2012). 2012 Annual Plan Ultra-Deepwater and Unconventional Natural Gas and Other Petroleum Resources Research and Development Program. Retrieved from http://www.fossil.energy.gov/programs/oilgas/ultra_and_unconventional/index.html

[17] Elkatatny, S., Moajil, A.M.A., & Nasr-El-Din, H.A. (2012). Evaluation of a New Environmentally Friendly Treatment to Remove Mn3O4 Filter Cake. Paper SPE-156451-MS presented at IADC/SPE Asia Pacific Drilling Technology Conference and Exhibition, Tianjin, China, 9-11 July 2012.

[18] Gjonnes, M., & Myhre, I.G. (2005). High Angle HPHT Wells. Paper SPE-95478-MS presented at SPE Latin American and Caribbean Petroleum Engineering Conference, Rio de Janeiro, Brazil, 20-23 June 2005.

[19] Guo, Q., Ji, L., & Rajabov, V. et al. (2012). Shale Gas Drilling Experience and Lessons Learned From Eagle Ford. Paper SPE-155542-MS presented at SPE Americas Unconventional Resources Conference, Pittsburgh, Pennsylvania USA, 5-7 June 2012.

[20] Guo, Q., Ji, L., & Rajabov, V. et al. (2012). Marcellus and Haynesville Drilling Data: Analysis and Lessons Learned. Paper SPE-158894-MS presented at SPE Asia Pacific Oil and Gas Conference and Exhibition, Perth, Australia, 22-24 October 2012.

[21] Hosseini, B.K., Ardali, M., & Chalaturnyk, R.J. et al. (2011). A New Analytical Approach To Investigate Heated Area in Thermal Recovery Techniques. Paper SPE-148836-MS presented at Canadian Unconventional Resources Conference, Alberta, Canada, 15-17 November 2011.

[22] Jafarpour, B., & Tarrahi, M. (2011). Critical Evaluation of the Ensemble Kalman Filter for Reservoir Parameter Estimation under Incorrect and Uncertain Prior Models. Paper SPE-143062-MS presented at SPE EUROPEC/EAGE Annual Conference and Exhibition, Vienna, Austria, 23-26 May 2011.

[23] Joshi, K. (2012). Comparison of Various Deterministic Forecasting Techniques in Shale Gas Reservoirs With Emphasis on the Duong Method (Master’s Dissertation). Texas A&M University, College Station, Texas, USA.

[24] Joshi, K., & Lee, W.J. (2013). Comparison of Various Deterministic Forecasting Techniques in Shale Gas Reservoirs. Paper SPE-163870-MS presented at SPE Hydraulic Fracturing Technology Conference, Woodlands, Texas, USA, 4-6 February 2013.

[25] Kashfi, M.S. (1992). Geology of the Permian “Supergiant” Gas Reservoirs in the Greater Persian Gulf area. Journ. Petrol. Geol., 15, 465-480.

[26] Ayling, L.J., Jenner, J.W., & Elkins, H. (2002). Continuous Circulation Drilling. Paper OTC-14269-MS presented at Offshore Technology Conference, Houston, Texas.

[27] Lee, J., Shadravan, A., & Young, S. (2012). Rheological Properties of Invert Emulsion Drilling Fluid Under Extreme HPHT Conditions. Paper SPE-151413-MS presented at IADC/SPE Drilling Conference and Exhibition, San Diego, California, USA, 6-8 March 2012.

[28] Maldonado, B., Arrazola, A., & Morton, B. (2006). Ultradeep HP/HT Completions: Classification, Design Methodologies, and Technical Challenges. Paper OTC-17927-MS presented at Offshore Technology Conference, Houston, Texas, - 2006.

[29] Moe, G.R., Johnson, C.K., & Ingle, R. et al. (2003). Innovative Well Completion Harnesses Deep, Hot South Texas Gas. Paper SPE 84514 presented at SPE Annual Technical Conference and Exhibition, Denver, Colorado, 5-8 October 2003.

[30] Nareh’ei, M.A., Shahri, M.P., & Zamani, M. (2012). Preparation and Characterization of Colloidal Gas Aphron based Drilling Fluids Using a Plant-based Surfactant. Paper SPE-160888-MS presented at SPE Saudi Arabia Section Technical Symposium and Exhibition, Al-Khobar, Saudi Arabia, 8-11 April 2012.

[31] Ogbonna, F.J., & Iseghohi, P.T. (2009). Research and Development: Utilization of Local Additive in the Cementation of HPHT Wells in Nigeria. Paper SPE-128608-MS presented at Nigeria Annual International Conference and Exhibition, Abuja, Nigeria, 3-5 August 2009.

[32] Ohme, B. (2007). Deep Trek High Temperature Electronics Project, Development of Silicon-On-Insulator (SOI) High Temperature Electronics. Retrieved from http://seca.doe.gov/technologies/oil-gas/publications/EPreports/NT41834_FinalReport.pdf#page=64

[33] Payne, M. (2010). HP/HT Challenges. Retrieved from http://www.spe.org/jpt/print/archives/2010/04/17HPHTFocus.pdf

[34] Payne, M.L., Pattillo, D., & Miller, R. et al. (2007). Advanced Technology Solutions for Next Generation HPHT Wells. Paper IPTC-11463-MS presented at International Petroleum Technology Conference, Dubai, U.A.E., 4-6 December 2007.

[35] Proehl, T., & Sabins, F. (2006). Drilling and Completion Gaps for HP/HT Wells in Deep Water. Society of Petroleum Engineers.

[36] Radwan, A.M., & Karimi, M. (2011). Feasibility Study of Casing Drilling Application in HPHT Environments; a Review of Challenges, Benefits, and Limitations. Paper SPE-148433-MS presented at SPE/IADC Middle East Drilling Technology Conference and Exhibition, Muscat, Oman, 24-26 October 2011.

[37] Rajabov, V., Miska, S.Z., & Mortimer, L. et al. (2012). The Effects of Back Rake and Side Rake Angles on Mechanical Specific Energy of Single PDC Cutters with Selected Rocks at Varying Depth of Cuts and Confining Pressures. Paper SPE-151406-MS presented at IADC/SPE Drilling Conference and Exhibition, San Diego, California, USA, 6-8 March 2012.

[38] Shadravan, A., Khodadadian, M., & Roohi, A. et al. (2009). Underbalanced Drilling in Depleted Formation Achieves Great Success: Case Study. Paper SPE-119211-MS presented at EUROPEC/EAGE Conference and Exhibition, Amsterdam, The Netherlands, 8-11 June 2009.

[39] Shadravan, A., Nabaei, M., & Amani, M. (2009). Dealing with the Challenges of UBD Implementation in Southern Iranian Oilfields. Paper SPE SPE-125281-MS presented at SPE/IADC Middle East Drilling Technology Conference & Exhibition, Manama, Bahrain, 26-28 October 2009.

[40] Shadravan, A., Nabaei, M., & Amani, M. (2009). Utilizing UBD Technology for Future Development of Parsi Oilfield, Challenges and Opportunities. Paper SPE-123270-MS presented at Offshore Europe, Aberdeen, UK, 8-11 September 2009.

[41] Shahri, M.P., Tehrani, M.M., & Namvar, M. (2011). Modeling and Numerical Analysis of Mud Filtration for a Well with a Finite-Conductivity Vertical Fracture: Based on Convection-Dispersion Filtrate Transport. Paper SPE-150784-MS presented at Nigeria Annual International Conference and Exhibition, Abuja, Nigeria, 30 July - 3 August 2011.

[42] Shahri, M.P., & Zabihi, S.H. (2012). A New Model for Determining the Radius of Mud Loss During Drilling Operation in a Radial Fractured Network. Paper SPE-163028-MS presented at Nigeria Annual International Conference and Exhibition, Lagos, Nigeria, 6-8 August 2012.

[43] Shahri, M.P., Zeyghami, M., & Majidi, R. (2011). Investigation of Fracture Ballooning and Breathing in Naturally Fractured Reservoirs: Effect of Fracture Deformation Law. Paper SPE-150817-MS presented at Nigeria Annual International Conference and Exhibition, Abuja, Nigeria, 30 July - 3 August 2011.

[44] Teodoriu, C., Yuan, Z., & Schubert, J. et al. (2012). Experimental Measurements of Mechanical Parameters of Class G cement. Paper SPE-153007-MS presented at SPE/EAGE European Unconventional Resources Conference and Exhibition, Vienna, Austria, 20-22 March 2012.

[45] Vazquez, G., Blanco, A.M., & Colina, A.M. (2005). A Methodology to Evaluate the Gas Migration in Cement Slurries. Paper SPE-94901-MS presented at SPE Latin American and Caribbean Petroleum Engineering Conference, Rio de Janeiro, Brazil, 20-23 June 2005.

[46] Yetunde, S., & Ogbonna, J. (2011). Challenges and Remedy for Cementing of HPHT Wells in Nigerian Operation. Paper SPE-150751-MS presented at Nigeria Annual International Conference and Exhibition, Abuja, Nigeria, 30 July - 3 August 2011.

[47] Yuan, Z., Al-yami, A.S., & Schubert, J.J. et al. (2012). Cement Failure Probability under HPHT Conditions Supported By Long Term Laboratory Studies and Field Cases. Paper SPE-154746-MS presented at SPE Annual Technical Conference and Exhibition, San Antonio, Texas, USA, 8-10 October 2012.

[48] Yuan, Z., Schubert, J., & Teodoriu, C. et al. (2012). HPHT Gas Well Cementing Complications and its Effect on Casing Collapse Resistance. Paper SPE-153986-MS presented at SPE Oil and Gas India Conference and Exhibition, Mumbai, India, 28-30 March 2012.

[49] Zamora, M., & Roy, S. (2000). The Top 10 Reasons to Rethink Hydraulics and Rheology. Paper SPE 62731 presented at IADC/SPE Asia Pacific Drilling Technology, Kuala Lumpur, Malaysia, 11-13 September 2000.

[50] Zamora, M., Roy, S., & Slater, K. et al. (2012). Study on the Volumetric Behavior of Base Oils, Brines, and Drilling Fluids Under Extreme Temperatures and Pressures. Paper SPE-160029-MS presented at SPE Annual Technical Conference and Exhibition, San Antonio, Texas, USA, 8-10 October 2012.




DOI: http://dx.doi.org/10.3968/j.est.1923847920120402.635

DOI (PDF): http://dx.doi.org/10.3968/g3219

Refbacks

  • There are currently no refbacks.


Copyright (c)



Share us to:   

Reminder

If you have already registered in Journal A and plan to submit article(s) to Journal B, please click the CATEGORIES, or JOURNALS A-Z on the right side of the "HOME".

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases: [email protected]; [email protected]; [email protected]

 Articles published in Energy Science and Technology are licensed under Creative Commons Attribution 4.0 (CC-BY).

 ENERGY SCIENCE AND TECHNOLOGY Editorial Office

Address: 1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.
Telephone: 1-514-558 6138 
Website: Http://www.cscanada.net Http://www.cscanada.org 
E-mail: [email protected]; [email protected]

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures