Development of the New Type Conical Teeth of PDC Drill Bit

Lei ZHANG

Abstract


The work elements of PDC drill bits are cylindrical polycrystalline diamond composite sheet and the cutting teeth of such shape can only cut the rock with the caster angle rake. In the process of drilling hard rocks, due to the large shear resistance and discontinuous cutting and rock breaking process, the rotation torque and torque ripple of drill bits are relatively large, resulting in low rock breaking efficiency and serious impact damage of composite sheet (Wilmot, 1998). In order to improve the ability of PDC drill bits to drill hard rock, a kind of cone PDC tooth is designed, which can plough and cut rocks with top rake, with low rock breaking resistance. It can reduce the rotation torque and torque ripple of drill bits, and improve the rock breaking efficiency and impact resistance of PDC drill bits.


Keywords


PDC drill bit; Conical teeth; Plowing and cutting type; Rock breaking efficiency

Full Text:

PDF

References


Eugene, S. D., & Ray, I. M. (2012). Innovative PDC cutter technology leads to step out performance improvements in diverse applications in shale plays [R].SPE/IADC 151569

Ohno, T., & Karasawa, H. (2002). Cost reduction of PDC bits through improved durability. Geothermics, 31(2), 245-262.

Sun, M. G., & Ma, D. K. (2001). Design and application of the PDC drill bit suitable for multi-bedded formation. Acta Petrolei Sinica, 22(5), 96-98.

Wilmot, G. M. (1998). Innovative Cutting Structure Improves Stability and Penetration Rate of PDC Bits Without Sacrificing Durability. SPE, 39310.

Zou, D. Y., & Liang, E. G. (2004). Discussion on the Design of PDC Drill Bit for Hard Formation. China Petroleum Machinery, 32(9), 28-31.

Zou, D. Y., Cao, J. F., Yuan, J., et al. (2011). Optimization design of the size and caster angle of PDC drill bit cutting teeth for hard formation. Petroleum Drilling Techniques, 39(6), 91-94




DOI: http://dx.doi.org/10.3968/11131

Refbacks

  • There are currently no refbacks.


Copyright (c) 2019 Jianghong JIA

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Share us to:   

Reminder

  • How to do online submission to another Journal?
  • If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

  • Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

  • Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
[email protected]; [email protected]; [email protected]

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY). 

ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:[email protected];  [email protected]

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures