Horizontal Well Bottom-Hole Pressure Drop Steam Flooding Numerical Calculation
Abstract
In the steam flooding process, when steam injection rate is high, wellhead and bottom hole string pressure substantially increased, oil displacement effect is affected. The numerical simulation method was used to study the process of horizontal steam flooding steam injection rate, steam hold on horizontal liquid rate and the number of holes, pore size to wellhead and bottom-hole pressure and the influence of tubing string. The calculation results show that: the steam injection amount was larger, the more pressure on the bottom of the well and string; the pipe diameter holes on the quantity increased, and the bottom of the well and the smaller string pressure. Injecting steam with more liquid rate the higher pressure were on the bottom of the well and string. Only properly reduce steam injection rate and the liquid rate, holes quantity and holes were reduced .the inner diameter tubing stress and bottom holes dramatically risen could be effectively reduced.
Key words: Horizontal well; Steam flooding; Numerical simulation; Pore size; Pressure drop
Keywords
Full Text:
PDFReferences
[1] Jetal, K. F. (1991). Pressure transient behavior of horizontal wells with and without gas cap or apiufer. SPE Formation Evaluation, 6(1), 86-94.
[2] Ozkan, E., & Reghavan, R. (1987). Horizontal well pressure analysis. SPE16378.
[3] Calvalho, R. S., & Rosa, A. (1988). Transient pressure behavior for horizontal wells in natural fracture reservoir. SPE 18302.
[4] Liu, C. Q., & Wang, X. D. (1991). The analysis methods of horizontal well testing in dual porosity medium. Test Mining Technology, 12(2), 1-61.
[5] Ozkan, E., & Reghavan, R. (1994). New solutions for well2 test 2 analysis problem: part 32 addtional alogrithms. SPE 28424.
[6] Zhou, S. T., & Zhang, Q. (1988). Experimental study on variable mass fluid flow in horizontal well. Journal of the University of Petroleum, 22(5), 53-55.
[7] Zhou, S. T., & Zhang, Q. (1988). The calculation model of pressure drop in horizontal wellbore two-phase. Journal of the University of Petroleum, 22(4), 43-58.
[8] Liu, X. P., Zhang, Z. S., Liu, P. G., & Guo, S. P. (2000). A model to calculate variable mass flow coupled with flow in a reservoir. Journal of Southwest Petroleum Institute, 22(2), 36-39.
[9] Wei, J. G. (2006). Pressure-drop calculation of oil-water two-phase variable mass stratified flow in horizontal pipelines. Oil Drilling & Production Technology, 28(5), 61-64.
[10] Wan, R. P. (2000). Modern completion engineering (Version 2, pp. 73-80). Beijing: Petroleum Industry Press.
[11] Liu, D. S., Gong, J., & Wu, H. H. (2010). Progress in experimental study of oil-gas-water three phase flow in horizontal pipelines. Oil Field Equipment, 39(4), 9-16.
[12] Xue, S. F., & Wang, H. J. (2009). Study of uniform steam injection technology in horizontal well and software development. Oil Field Equipment, 38(1), 38-41.
[13] Dai, F., Sun, K., Li, S., Jiang, C., & Chen, Y. N. (2009). Research of wellbore multiphase flow technology for underbalanced drilling. Oil Field Equipment, 38(1), 5-8.
[14] Xue, S. F., & Wang, H. J. (2009). Study of uniform steam injection technology in horizontal well and software development. Oil Field Equipment, 38(1), 38-41.
DOI: http://dx.doi.org/10.3968/5092
Refbacks
- There are currently no refbacks.
Copyright (c)
Reminder
- How to do online submission to another Journal?
- If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:
1. Register yourself in Journal B as an Author
- Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.
2. Submission
- Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.
We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
[email protected]; [email protected]; [email protected]
Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY).
ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office
Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.
Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:[email protected]; [email protected]
Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures