Quality Control for Weathered Rock Directional Drilling Pilot Hole Construction

ZHAO Peng, ZHANG Youzhu, ZHANG Haiyang

Abstract


Directional Drilling Technology originated from the oil drilling industry, combining industrial and public utility construction technology, after the evolution of modern horizontal directional drilling technology, which is widely used in the construction of municipal pipelines, oil and gas pipeline industry, and is a kind of trenchless surface through the construction technology. At present, there is more weathering rock to pass through in the oil and gas pipeline construction, so a higher requirements for the construction of directional drilling mud. The weathering degree of heterogeneity of the rock at the same time and also caused great difficulties to construction, and the guide hole construction in the construction of directional drilling is the key control to the key working procedure, after the guide hole is dragged back reaming and pipe at all levels, the basis of the guide hole quality directly affects the pipeline back to success, is the most important factor in engineering which can be successfully completed, so how to control the construction quality of directional drill guide hole is particularly important.
Key words: Weathered rock; Directional drilling; Pilot hole; Mud


Keywords


Weathered rock; Directional drilling; Pilot hole; Mud

Full Text:

PDF

References


[1] Chen, X. H., Zhang, D. Q., Kang, X. S., & Jin, J. (2006). Rock in the middle reach of Yangtze river directional drilling crossing construction technology for the first time. The Petroleum Engineering Construction, 32(3), 43-47.

[2] Li, X. M. (2004). Central African rock excavation guide drilling technology. Journal of Product Technology, 7, 24.

[3] Liu, C. T., & Wang, X. J. (2012). Shallow of directional drilling pipe project construction quality control. Science and Technology Information, 11, 36.

[4] China Association of Trenchless Technology. (2000). Horizontal directional drilling technology.

[5] Xu, X. B. (2007). Long distance oil and gas pipeline engineering construction technical manuals. Beijing: Petroleum Industry Press.

[6] Sun, Q. M. (2006). The factory power supply technology. Beijing: Chemical Industry Press.

[7] Jia, Z. H. (2006). Enterprise energy-saving technology. Beijing: Chemical Industry Press.




DOI: http://dx.doi.org/10.3968/5158

Refbacks

  • There are currently no refbacks.


Copyright (c)



Share us to:   

Reminder

  • How to do online submission to another Journal?
  • If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

  • Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

  • Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
[email protected]; [email protected]; [email protected]

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY). 

ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:[email protected];  [email protected]

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures