Drilling Engineering Design and Application of Well Fengshen-x601

WANG Tianyu

Abstract


Thick gypsum and glutenite exist in Fengshen block, which brings a lot of technical problems in drilling construction, therefore, the drilling engineering design optimization of well Fengshen-x601 was launched. Based on the drilling purpose and combined with the actual drilling information of offset wells, the five-intervalled well track and the well structure with four layer casing were adopted in this well, the HJT537GK high efficiency cone bit was recommended in glutenite formation, and saturated saltwater polysulfonate lubricating drilling fluid system was used in gypsum section, through these measures, safety drilling was guaranteed in this well. The average rate of penetration was 3.15 m/h in the actual drilling operation, which increased by 13% compared with the offset wells, in addition, there were no accidents and complex situations. These effective implementation provided some guidance and reference for drilling operations of in the similar block.
Key words: Well track with five-intervalled; Gypsum; Glutenite; Drilling design; Fengshen-x601


Keywords


Well track with five-intervalled; Gypsum; Glutenite; Drilling design; Fengshen-x601

Full Text:

PDF

References


[1] Gong, J. F., Wang, Q., & Xie, X. H. (2008). Super-deep well fracturing technique in glutenite reservoirs and its application-take well Fengshen1 in Shengli oilfield for example. Journal of Oil and Gas Technology, 30(2), 143-146.

[2] Wang, Y. C. (2010). Optimization of drilling technology thick salt layer (Doctoral dissertation). Southwest Petroleum University, China.

[3] Han, Y. M. (2007). The research of drilling technology in Fengshen field of Shengli oilfield (Doctoral dissertation). China University of Petroleum (East China), China.

[4] Guo, M., Yue, S. H., Liu, Y. P., & Wang, J. Y. (2014). Drilling design and application of well Fengshen1-p1. Special Oil & Gas Reservoirs, (2), 144-146.

[5] Ding, S. D., & Zhang, W. D. (2002). Domestic & oversea cementing techniques of gas-channeling prevention. Petroleum Drilling Techniques, 30(5), 35-38.




DOI: http://dx.doi.org/10.3968/5609

Refbacks

  • There are currently no refbacks.


Copyright (c)



Share us to:   

Reminder

  • How to do online submission to another Journal?
  • If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

  • Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

  • Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
[email protected]; [email protected]; [email protected]

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY). 

ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:[email protected];  [email protected]

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures