The New Method and Application of Friction Torque for Extended Reach Well

JIA Jianghong, YAN Zhenlai, DOU Yuling, HUANG Genlu, MA Qingtao

Abstract


The extended reach well has the characteristics of long horizontal displacement, big hold angle and long open hole. The forecast and control of friction torque is one of the key factors of successful drilling of extended reach well. Based on the characteristics of extended reach well, considering the effect of drill string stiffness and drill string buckling on the friction & torque of the tube, a modified 3D soft-string calculation model for friction & torque of the extended reach well is proposed. The corresponding software has been programmed, and the model is applied in well A. The calculation result shows that the new method’s calculation result is consistent with the experimental result, and the torque and hook load errors are within 10%. The method could satisfy the engineering requirement, which provide a good guidance for the friction & torque analysis in the process of profile optimal design and drilling operation for the extended reach well.
Key words: Extended reach well; Friction＆torque; Drill string stiffness; Drill string buckling; Drilling operation


Keywords


Extended reach well; Friction＆torque; Drill string stiffness; Drill string buckling; Drilling operation

Full Text:

PDF

References


[1] Chen, L. L. (1994). Summary of friction-reducing problems in horizontal well drilling. Drilling & Production Technology, 17(1), 6-10.

[2] Zhang, L. Q. (2008). Calculating model of torque and drag in extended reach well. Fault-Block Oil & Gas Field, 15(2), 88-90.

[3] Fan, G. D., Huang, G. L., & Li, X. F. (2013). Calculation model of friction torque for horizontal well string. Drilling & Production Technology, 36(5), 22-25.

[4] Yan, T., Zhang, J. Q., & Sun, X. Z. (1995). Analysis of drillstring frictional drag in horizontal wells of Daqing. Journal of Daqing Petroleum Institute, 19(2), 1-5.

[5] Johansick, C. A. (1984). Torque and drag in direction wells prediction and measurement. Journal of Petroleum Technology, 36(6), 987-992.

[6] Ho, H. S. (1988, October). An improved modeling program for computingthe torque and drag in directional and deep wells. Paper presented at SPE Annual Technical Conference and Exhibition, Houston, Texas.

[7] Maidla, E. E., & Wojtanowicz, A. K. (1988, May). Prediction of casing running loads in directional wells. Paper presented at Offshore Technology Conference, Houston, Texas.

[8] Chen, V. C., Lin, V. H., Cheatham, J. B. (1989). An analysis of tubing and casing buckling in horizontal wells. Paper presented at Offshore Technology Conference, Houston, Texas.

[9] Wu, J., & Juvkam-Wold, H. C. (1993, March). Preventing helical buckling of pipes in extended reach and horizontal wells. Paper presented at SPE Production Operations Symposium, Oklahoma City, Oklahoma.

[10] Salies, J., Azar, J. J., & Sorem, J. R. (1994, October). Experimental study and mathematical modeling of helical buckling of tubulars in inclined wellbores. Paper presented at International Petroleum Conference and Exhibition of Mexico, Veracruz, Mexico.

[11] Kuru, E., Martinez, A., Miska, S., & Qiu, W. (1999, March). The buckling behavior of pipes and its influence on the axial force transfer in directional wells. Paper presented at SPE/IADC Drilling Conference, Amsterdam, Netherlands.

[12] Mitchell, R. (2002, February). New buckling solution for extended reach wells. Paper presented at IADC/SPE Drilling Conference, Dallas, Texas.




DOI: http://dx.doi.org/10.3968/5674

Refbacks

  • There are currently no refbacks.


Copyright (c)



Share us to:   

Reminder

  • How to do online submission to another Journal?
  • If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

  • Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

  • Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
[email protected]; [email protected]; [email protected]

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY). 

ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:[email protected];  [email protected]

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures