The Analysis on Wall Effect After Expansion and Expandable With Threaded Performance of Single Wellbore Diameter Expandable Casing

Zhiyuan HUANG, Peng LEI, Tao SHI

Abstract


Single wellbore diameter expandable casing technology is an important development direction of the expandable casing technology. The development and maturity of this technology will cause a revolution in drilling technology. Elastic-plastic finite element analysis of frictional contact is used to analyze the effect of geometrical deviation before expansion on casing thickness after expansion; the expansion casing thread connections expandability is analyzed, the connection status of the expanded general casing thread is simulated, then based on the study above, one kind of thread which is suitable for the single wellbore diameter expandable Casing connection is designed. The results for this paper provide the basis for the standardization of the expansion casing’s machining precision and the selection of connecting thread, which promote the development of single wellbore diameter expandable casing.

Keywords


Single wellbore diameter expandable casing; Drilling technology; Analysis of frictional contact; Threaded performance; Non-uniform wall thickness

Full Text:

PDF

References


[1] Lian, Z. H., Shi, T. H., Yang, L., Gao, Z. H., Dong, F., Li, Y.,... Ye, L. X. (2003). Computer simulating analysis of expandable casing. Natural Gas Industry, 23(4), 41-43.

[2] Zhang, J. B., Mao, L. H., Shi, T. H., & Lian, Z. H. (2004). Experimental study on uneven deformation of inflating pipe during inflation. Oil Drilling & Production Technology, 26(2), 9-12.

[3] Filoppov, A., Mark, R., Cook, L., York, P., Ring, L., & Mccoy, T. (1999, October). Expandable tubular solutions. Paper presented at SPE Annual Technical Conference, Houston, USA.

[4] Murthy, Y. V. L. N., Rao, G. V., & Iyer, P. K. (1996). Numerical simulation of welding and quenching processer using transient thermal and thermo-elasto-plastic formulation. Computers & Structures, 60(1), 131-154.

[5] Pervez, T., Qamar, S. Z., Seibi, A. C., & Al-Jahwari, F. K. (2008). Use of SET in cased and open holes: Comparison between aluminum and steel. Materials and Design, 29(4), 811-817.

[6] Gilles, P., El-Ahmar, W., Jullien, J. F. (2009). Robustness analyses of numerical simulation of fusion welding NeT-TG1 application: “Single weld-bead-on-plate”. International Journal of Pressure Vessels and Piping, 86(1), 3-12.

[7] Seibi, A. C., Pervez, T., Al-Hiddabi, S., & Karrech, A. (2005). Finite element modeling of a solid tubular expansion-a typical well engineering application. SPE-84943-MS.

[8] Weber, G., & Anand, L. (1990). Finite deformation constitutive equations and a time integration procedure for isotropic, hyperelastic-viscoplastic solid. Computer Methods in Applied Mechanics & Engineering, 79(2), 173-202.

[9] Zhu, Y. L., Wang, X. J., Kang, Y. L., & Zhang, K. (1996). Analyses and optimizations of metal forming technology with finite deformation elasto—plastic finite element method. Journal of Mechanical Engineering, 32(6), 37-44.

[10] Haut, R. C. (1999, October). Meeting economic challenges of deepwater drilling with expandable-tubular technology. Paper presented at Deep Offshore Technology International Conference, Stavanger.

[11] Lai, N. J., Ye, Z. B., & Liu, X. J. (2005). In-house study on water locking damage of tight sand gas reservoirs with low permeability. Natural Gas Industry, 25(4), 125-127.

[12] Zhu, H. B., Yu, Z. S., Tang, C. L., Lu, L., & Ma, X. P. (2012). Expansion parameter optimization and expansion simulation for expandable tubular. Journal of Xi’an Jiaotong University, 46(1), 103-107.




DOI: http://dx.doi.org/10.3968/8595

Refbacks

  • There are currently no refbacks.


Copyright (c) 2016 Zhiyuan HUANG

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Share us to:   

Reminder

  • How to do online submission to another Journal?
  • If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

  • Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

  • Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
[email protected]; [email protected]; [email protected]

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY). 

ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:[email protected];  [email protected]

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures