Mechanisms and Application for Hydraulic Pulsed Cavitating Jet Generator

Hongna QU, Gensheng LI, Dongxing JIANG

Abstract


To improve the rate of penetration (ROP) further, based on analysis of the jet modulating mechanism, a new drilling tool is designed which couples the advantages of both pulsed jet and cavitating jet. When drilling fluid flows through the tool in drilling process, the fluid is modulated to pulsed and cavitating jet by impellers and in self-resonant chamber. Thus, pulsed cavitating jet is formed at the outlet of the bit nozzle. Because of jet pulsation, cavitating erosion and local negative pressure effect, bottom cuttings cleaning efficiency is enhanced and the ROP is improved. The hydraulic pulsed cavitating jet generator has been applied in 8 oil fields and more than 100 wells in China. The results indicated that the maximum density of test drilling fluid was 1.70 g/cm3, the maximum test well depth was 6,162 m. The generator could work over 230 h, and the maximum operation time was above 520 h. As the result, the average ROP had been increased by 10.1% to 104.4%. The generator has the characteristics of simple structure and long operation time, and has a well adaptability to the existing drilling equipments, technological parameters, which provides a safe and efficient new drilling technology for deep well.


Keywords


Hydraulic pulsation; Cavitating jet; Penetration rate; Generator; Mechanism; Experiment; BHA

Full Text:

PDF

References


[1] Andersen, E. (1990). Deep drilling basic research-final report ( Report No. GRI-90/0265.1). USA: Maurer Engineering Inc.

[2] Johnson, V. E., & Conn, A. F. (1979). Self-resonant cavitating jets. Paper presented at Proc 6th Int Sympon Water Jet Technology, England.

[3] Shen, Z. H. (1987). Experimental study on rock erosion by self-resonant cavitaing jets. Paper presented at Proc. of Int. Water Jet Symp, Beijing, China.

[4] Li, G. S., & Shen, Z. H. (1991). The impact pressure characteristics and rock erosion effects of self-resonant cavitating jets. Paper presentes at Proc. of the 7th Annual Meeting of Water Jet Technology Society of Japan, Tokyo.

[5] Li, G. S., Shen, Z. H., & Zhou, C. S. (2003). An experimental study on impact pressure characteristics of slef-resonant cavitating jets. Journal of Hydrodynamics, 18(5), 570-575.

[6] Cai, Z. F. (1993). Theoretical study and application of self-resonant pulsed jet nozzle. High Pressure Water Jet, (1), 1-14.

[7] Xiong, J. Y., Liao, R. Q., & Chen, D. J. (1994). Study on jet nozzle mechanism and its hydraulic performance. Journal of Southwest China Petroleum Institute, 16(2), 74-78.

[8] Tang, C. L., Hu, D., Yang, L., & Pei, J. H. (2007). Experimental study on high-efficiency pulsed jet nozzle used in jet drilling. Natural Gas Industry, 27(11), 55-57.

[9] Wei, Q., & Cao, S. Y. (2007). Experimental study on the mechanism of pulse activated by a novel rotary ball. Journal of Sichuan University (Engineering Science Edition), 39(4), 16-19.

[10] Kolle, J., & Marvin, M. (1999). Hydro pulses increases drilling penetration rates. Oil&Gas Journa1, 97(13), 33-37.

[11] Wang, Z. F. (2005). Discussion on theory & methodology of suction-pulse drilling technique. Oil Drilling & Production Technology, 27(6), 13-15.

[12] Chen, X. Y., Lian, Z. H., & Jiang, H. (2000). Experimental study of downhole mechanical-pulse generator. Journal of Southwest Petroleum Institute, 22(2), 73-76.

[13] Yang, Y. Y., Wu, Z. J., & Shen, Z. H. (2003). Modulation mechanism of low-pressure pulse jet and modulator working simulation. Journal of the University of Petroleum, 27(3), 40-42.

[14] Wang, M. S., Wang, Z. F., & Li, Z. H. (2006). Development and application of a hydraulic-pulse drilling tool. China Petroleum Machinery, 34(5), 27-28.

[15] Ni, H. J., Han, L. J., Ma, Q. M., & Liu, K. F. (2006). Study on downhole vibration drilling tool induced by hydropulse. Oil Drilling & Production Technology, 28(2), 15-17.

[16] Ni, H. J., Han, L. J., & Xu, J. L. (2006). A rotor-modulated hydraulic pulse drilling tool in bit cavity. Drilling & Production Technology, 29(2), 62-65.

[17] Wang, Y., & Shi, L. H. (2005). Study of a hydraulic-pulse-percussion drilling tool and its trial. Petroleum Drilling Techniques, 34(2), 51-52.

[18] Ma, Q. M. (2005). The down hole vibration drilling technique induced by hydro pulse. Petroleum Drilling Techniques, 33(1), 12-14.

[19] Wei, Q., Li, Q., & Cao, S. Y. (2007). Design and development of new negative pulsation drilling tool. Oil Field Equipment, 36(6), 39-41.

[20] Shi, H. Z. (2009). Mechanisms and experimental research of hydraulic pulsed cavitating jet (Doctoral dissertation). China University of Petroleum (Beijing), Beijing, China.

[21] Li, G. S., Shi, H. Z., & Huang, Z. W. (2008). Mechanisms and tests for hydraulic pulsed cavitating jet assisted drilling. Petroleum Exploration and Development, 35(2), 239-243.

[22] Li, G. S., Shi, H. Z., & Shen, Z. H. (2008). Mechanisms and tests for hydraulic pulsed cavitating jet assisted drilling. Petroleum Exploration and Development, 35(2), 239-243.

[23] Conn, A. F. (1998, February). On the fluid dynamics of working water jets: Continuous, pulsed and cavitating. Paper presented at 5th Pacific Rim International Conference on Water Jet Technology, New Dehli, India.

[24] Yang, Y. Y., Shen, Z. H., & Wang, R. H. (2002). Analysis of the mechanisms of improving ROP using low pressure pulse jetting techniques in under-balanced drilling. Petroleum Drilling Techniques, 30(5), 15-16.

[25] Ma, D. J., Li, G. S., & Shi, H. Z. (2009). An experimental study of the parametric optimization of the hydro-pulse cavitation jet generator. China Petroleum Machinery, 37(12), 9-11.

[26] Zhang, Z. Y., Li, G. S., & Shi, H. Z. (2009). Experiment study on ultra-deep well hydraulic pulsating-cavitating water jet drilling. Petroleum Drilling Techniques, 37(4), 11-14.

[27] Zhang, Z. Y., Li, G. S., & Shi, H. Z. (2009). Experiment study on ultra-deep well hydraulic pulsating-cavitating water jet drilling. Petroleum Drilling Techniques, 37(4), 11-14.

[28] Li, G. S., Shi, H. Z., & Liao, H. L. (2009). Hydraulic pulsed cavitating jet-assisted drilling. Petroleum Science and Technology, 27(2), 197-207.

[29] Wang, X. J., Li, G. S., & Kang, Y. J. (2009). Improvement of penetration rate with hydraulic pulsating-cavitation jet compound drilling technology. Acta Petrolei Sinica, 30(1), 117-120.

[30] Wang, X. J., Li, G. S., & Kang, Y. J. (2009). Improvement of penetration rate with hydraulic pulsating-cavitation jet compound drilling technology. Acta Petrolei Sinica, 30(1), 117-120.

[31] Li, G. S., Shi, H. Z., Niu, J. L. (2010). Hydraulic pulsed cavitating jet assisted deep drilling: An approach to improve rate of penetration. SPE 130829,2010.

[32] Li, G., Shi, H., Niu, J., Huang, Z., Tian, S., & Song, X. (2010, June). Hydraulic pulsed cavitating jet assisted deep drilling: An approach to improve rate of penetration. Paper presented at International Oil and Gas Conference and Exhibition in China, Beijing, China.

[33] Shi, H. Z., Li, G. S., & Wang, X. J. (2010). Improving the rate of penetration by hydraulic pulsating-cavitating water jet under-balance pressure drilling. Petroleum Exploration and Development, 37(1), 111-115.

[34] Shi, H. Z., Li, G. S., & Shen, Z. H. (2009). Application of hydraulic pulsation-cavitating generator with Power V system in well Fengcheng 1. Petroleum Drilling Techniques, 37(1), 14 - 17.




DOI: http://dx.doi.org/10.3968/8953

Refbacks

  • There are currently no refbacks.


Copyright (c) 2017

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Share us to:   

Reminder

  • How to do online submission to another Journal?
  • If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

  • Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

  • Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
[email protected]; [email protected]; [email protected]

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY). 

ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:[email protected];  [email protected]

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures