Drilling Technical Difficulties and Solutions in Development of Hot Dry Rock Geothermal Energy

Weili LIU, Weili LIU

Abstract


The exploration and development of hot dry rock resources, first of all, needs to address the drilling issues in deep, hot, hard and unstable formations. By studying geological features and storage conditions of hot dry rocks, the key technical difficulties of hot dry rock drilling are presented. The high-temperature resistance performance index of oil and gas drilling technologies at home and abroad are investigated. The applicability of high effective rock breaking tools, MWD instruments, drilling fluid systems, well cementing and completion technologies are analyzed, and feasibility analyses have been conducted on gas drilling, dry wellbore cementing and foam pressurized drilling techniques. On the basis of the above analyses, the developing directions and issues urgently to be addressed about domestic hot dry rock drilling technology are discussed so as to provide references for drilling program optimization and drilling technology research in the development of hot dry rock geothermal energy.


Keywords


Hot Dry Rock (HDR); Drilling; High-temperature resistance; High effective rock breaking

Full Text:

PDF

References


Bachler, D., & Kohl, T. (2005). Coupled thermal-hydraulic-chemical modeling of enhanced geothermal systems. Geophysical Journal International, 161(2), 533-548.

Han, W. H. (2012). Development status and trends of casing running tools both abroad. National Oil and Gas Field Drilling Technology and Equipment Seminar.

He, S. M., An, W, H., & Tang, J. P., et al. (2008). Practice and recognition of nitrogen drilling in Mandong-No. 2 Well Oil. Drilling&Production Technology, 30(3), 15-18.

Ji, X. T. (2005). Application of foam pressurized drilling technology. Coal Geology of China, 17(5), 119-121.

Jiang, W., Jiang, S. Q., & Fu, X. S., et al. (2013). Research and progress on application of rotary steerable drilling technology. Natural Gas Industry, 33(4), 75-79.

Lai, X. Q., et al. (2009). Foam drilling fluid technology in ultra -high temperature geothermal wells. Drilling Fluid and Completion Fluid, (2), 37-38.

Lu, H. C. (2012). Study of novel temperature-resistant fluid loss additive for wells cementing (Master’s thesis). Tianjin University.

Ma, Q. T. (2013). New technology of drilling fluids conversion after gas drilling. Petroleum Drilling Techniques, 41(5), 67-70.

Peng, X. M. (2009). Discussion on hot dry rock geothermal resources drilling technology in China. Exploration Engineering (Rock & Soil Drilling and Tunneling), (Suppl.), 167-169.

Qi, F. Z., Shen, R. C., & Jin, Q. J., et al. (2012). The status quo and research direction of cementing technology in China. Drilling & Production Technology, 35(16), 445-446.

Wang, X. Z. (2010). Study on great recovery enhancement by water flooding for dry hot rocks. Journal of Southwest Petroleum University (Natural Science Edition), 32(5), 121-125.

Xi, B. P., Zhao, J. C., & Zhao, Y. S., et al. (2011). Research on key drilling technology for high temperature rock mass geothermal resources. Journal of Rock Mechanics and Geotechnical Engineering, 30(11), 2234-2243.

Xiao, Z., Wu, J., & Yan, X. B., et al. (2014). Development trend of gas drilling technology and exploration of new technology. Drilling&Production Technology, 37(5), 5-7.

Yang, F., Li, J., & Ren, X. J. (2012). The current situation of hot dry rock exploration and development in China. Resources Environment&Engineering, 26(4), 339-341.

Yao, R. G., Jiang, G. C., & Li, W., et al. (2013). Research and Evaluation on a New High Temperature Resistance and High Density Nano- based Drilling Fluid. Drilling Fluid and Completion Fluid, 30(2), 25-28.

Zhao, J. C. (2010). Experimental research on rock breaking by impacting-cutting drilling under high-temp and high-press condition. Doctoral Dissertation of Taiyuan University of Technology.

Zhou, Y., Baom, A. Q., & Cai, W. J., et al. (2012). Model SLTIT rotional impact drilling speedup tool. China Petroleum Machinery, 40(2), 15-17.




DOI: http://dx.doi.org/10.3968/9456

Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 Jianghong JIA

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Share us to:   

Reminder

  • How to do online submission to another Journal?
  • If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

  • Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

  • Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
[email protected]; [email protected]; [email protected]

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY). 

ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:[email protected];  [email protected]

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures