Two-Phase Liquid Production Allocation in Multilayer Producing Wells Using Temperature Measurements

Ahmed Daoud

Abstract


This work presents a methodology of allocating oil rate and associated water cut to each individual layer using temperature measurements and total surface production of oil and water.

This paper consists of two parts. In part one; an analytical forward model is proposed for wellbore temperature response under two-phase production in a multilayer geometry, using a nodal representation of the well. This model accounts for the formation geothermal gradient, steady-state oil-water flow in the wellbore, friction loss and Joule-Thomson effect in the wellbore, contrast in the thermal and physical properties of oil and water, wellbore heat losses due to unsteady heat conduction in the earth, and the mixing of the fluid streams of contrasting temperature.

The second part shows the application of the above solution by applying inversion techniques on temperature data coupled with forward model to allocate water and oil influx from producing layers. The inversion result is verified using a variety of commingled flow problems including a field case of a deviated well producing an oil-water mixture from two active completions. Inversion results seem to be robust within +/-15% provided the temperature contrast between the commingled layers is at least one order of magnitude greater than the resolution of the temperature measurements (e.g., 4°C contrast for 0.1°C resolution)

Key words: Oil rate; Temperature measurement; Nodal representation; Inversion techniques


Keywords


Oil rate; Temperature measurement; Nodal representation; Inversion techniques

Full Text:

PDF

References


[1] Al-Asimi, M., Butler, G., Brown, G., Hartog, A., Clancy, T., Cosad, C., Fitzgerald, J., Navarro, J., Gabb, A., Ingham, J., Kimminau, S., Smith, J., & Stephenson, K. (2002). Advances in Well and Reservoir Surveillance. Schlumberger Oilfield Review, 14( 4), 14-35.

[2] Bird, R.B., Stewart, W.E., & Lightfoot, E.N. (2002). Transport Phenomena (Second edition). New York: John Wiley & Sons.

[3] Brown, G. A., & Hartog, A. (2002). Optical Fiber Sensors in Upstream Oil and Gas. Journal of Petroleum Technology, 54(11), 63-65.

[4] Curtis, M.R., & Witterholt, E.J. (1973). Use of the Temperature Log for Determining Flow Rates in Producing Wells. Paper SPE 4637 presented at the 48th Annual fall meeting of the society of petroleum engineers of AIME, Las Vegas, Nevada, Sept. 30 - Oct. 3, 1973.

[5] Dake, L.P. (2001). Fundamentals of Reservoir Engineering, Amsterdam, The Netherlands: Elsevier.

[6] Daoud, A., & Jalali, Y. (2004). System and Method for Determining Flow Rates in a Well. Patent application published under the Patent Corporation Treaty (PCT) number PCT/IB2004/002639 and World Intellectual Property Organization number WO 2005/035943 A1.

[7] Hasan, A.R., & Kabir, C.S. (1991). Heat Transfer During Two-Phase Flow in Well Bores: Part I- Formation Temperature. Paper SPE presented at the 66th Annual Technical Conference and Exhibition, Dallas, Oct. 6-9, 1991.

[8] Lasdon, L.S., Waren, A.D., Jain, A., & Ratner, M. (1978). Design and Testing of a Generalized Reduced Gradient Code for Non Linear Programming. ACM Transaction on Mathematical Software, 4(1), 34-50.

[9] Li, H., Zhu, D., Lake, L.W., & Hill, A.D. (1999). A New Method to Interpret Two-Phase Profiles From Temperature and Flowmeter Logs. Paper SPE 56793 presented at the 1999 SPE Annual Technical Conference and Exhibition, Houston, 3-6 October.

[10] William, D., & McCain, Jr. (1990). The Properties of Petroleum Fluids. Tulsa: PennWell Books.

[11] Nocedal, J., & Wright, S. (1999). Numerical Optimization. New York: Springer-Verlag.

[12] Popov, Y. A., Pribnow, D., Sass, J., Williams, C., & Burkhardt, H. (1999). Characterization of Rock Thermal Conductivity by High-Resolution Optical Scanning. Geothermics, 28(2), 253-276.

[13] Rabie, R., Daoud, A., El-Tayeb, E., & Abdel Dayem, M. (2010). Production Allocation in Multi-Layers Gas Producing Wells using Temperature Measurements. Paper SPE 139261 presented at SPE Latin American & Caribbean Petroleum Engineering Conference, Lima, Peru, 1–3 December.

[14] Ramey, H.J. Jr. (1962). Well Bore Heat Transmission. Journal of Petroleum Technology, 14(4), 427-435.

[15] Sagar, R., Doty, D.R., & Scmidt, Z. (1991). Predicting Temperature Profiles in a Flowing Well. SPEPE, 6(4), 441-448.

[16] Schlumberger. (2010). Eclipse 100 and 300 Technical Description.




DOI: http://dx.doi.org/10.3968/j.aped.1925543820120302.281

Refbacks

  • There are currently no refbacks.


Copyright (c)



Share us to:   

Reminder

  • How to do online submission to another Journal?
  • If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

  • Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

  • Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
[email protected]; [email protected]; [email protected]

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY). 

ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:[email protected];  [email protected]

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures