Efficiency Criterion of Corrosion Inhibitors of Carbon Steel in Seawater

K. Habib

Abstract


A criterion of the efficiency evaluation of corrosion inhibitors of metallic samples in aqueous solutions was proposed for the first time.The criterion was derived based on calculating the limit of ratio value of the resistivity of carbon steel sample in inhibited seawater (ρins) to the resistivity of the carbon steel sample in blank seawater (ρs). In other words, the criterion; lim (ρins/ρs) =1 will determine the efficiency of the corrosion inhibitor in the seawater when ρins becomes equal (decreases) to ρs  as a function of time of the exposure of the sample to the inhibited seawater. This criterion is not only can be used to determine the efficiency of different corrosion inhibitors, but also, the criterion can be used to determine the efficiency of corrosion inhibitors with a wide range of concentrations in different aqueous solutions. In addition, the criterion can be applied under diverse test conditions with a predetermined period of inhibitor’s dosages. 
Key Words: Efficiency of corrosion inhibitors; Resistivity; Carbon steel; Seawater

Keywords


Efficiency of corrosion inhibitors; Resistivity; Carbon steel; Seawater

Full Text:

PDF

References


[1] Uhlig, H. (1971). Corrosion and Corrosion Control. New York: John Wiley & Sons Inc.

[2] Gutzeit, J. (1993). Failure Avoidance: Corrosion Inhibitor Can Cause Corrosion. Materials Peroformance, 32, 64-65.

[3] Tanno, K., Itoh, M., Sekiya, H., Yashiro, H., & Kumagai, N. (1993). The Corrosion Inhibition of Carbon Steel in Lithium Bromide Solution by Hydroxide and Molybdate at Moderate Temperatures. Corrosion Science, 34(9), 1453-1461.

[4] Kalota, D., & Silverman, D. (1994). Behavior of Aspartic Acid as a Corrosion Inhibitor for Steel. Corrosion Science, 50(2), 138-145.

[5] Hernandez, G., Kucera, V., Thierry, D., Pedersen, A., & Hermansson, M. (1994). Corrosion Inhibition of Steel by Bacteria. Corrosion Science, 50(8), 603-608.

[6] Atsusni, C., et al. (1992). Corrosion Engineering, 41,333-334.

[7] Thoren, A. (1993). Corrosion Inhibitor (pp. 165-171). Houston, Texas: NACE-7.

[8] Trabanelli, G. (1989). Reviews on Corrosion Inhibitor Science and Technology (pp. 1-14). Houston, Texas: NACE.

[9] Deberry, D. (1989). Reviews on Corrosion Inhibitor Science and Technology (pp. 11-19). Houston, Texas: NACE.

[10] Boboian, R. (1986). Electrochemical Technique for Corrosion Engineering. Houston, Texas: NACE.

[11] Habib, K. (2011). Measurement of Volume Resistivity/Conductivity of Metallic Alloy in Inhibited Seawater by Optical Interferometry Techniques. Review of Scientific Instruments, 82, 34-103.

[12] Habib, K. (2011). Measurement of Bulk Resistivity/Conductivity of Carbon Steel in Inhibited Seawater by Holographic Interferometry Techniques. Journal of Electrochemical Society, 158(12), C445-C449.

[13] Habib, K. (2013). Surface Resistivity/Conductivity of Oxide–Hydroxide Compounds in Inhibited Seawater by Optical Interferometry Inhibited Seawater by Optical Interferometry. Journal of Saudi Chemical Society. Retrieved from http://dx.doi.org/10.1016/j.jscs.2013.03.010




DOI: http://dx.doi.org/10.3968/j.aped.1925543820130602.1829

Refbacks

  • There are currently no refbacks.


Copyright (c)



Share us to:   

Reminder

  • How to do online submission to another Journal?
  • If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

  • Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

  • Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
[email protected]; [email protected]; [email protected]

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY). 

ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:[email protected];  [email protected]

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures