Carbon-Polyol Coating Using Carbon Produced From Palm Kernel Cake (PKC)

M. H. Selamat, A. H. Ahmad

Abstract


In our quest to create awareness in using renewable, sustainable natural resources and efficient waste management, palm kernel cake (PKC) which is the waste from the palm industries was used in preparation of Carbon-polyol coating. PKC was subjected to pyrolisis process and the carbon residue obtained was used as a black pigment. In this work modified Polyol was used as the binder for its ideal properties as vehicle to produce good opacity of paint. Various carbon-polyol dispersant with different weight compositions (wt%) of carbon prepared and tested against its respective rheological properties in order to determine ideal paint/ink system. Two different types of paper material (Brown paper B and white paper W) were chosen as a substrate and characterised. Each of the paper was then proofed with Carbon-polyol using palm kernel carbon (PKC) and commercial carbon (PURE_C). Lightfastness test was carried out on the paper specimens and the results on the total colour difference (dE) are obtained. It was found that the total colour change (dE) in specimens using brown paper (B) coated with Carbon polyol coating using carbon derived from palm kernel carbon (PKC_B) and the commercial carbon (PURE_C_B) is within 10%. The other two specimens, using white paper (PKC_W and PURE_C_W), the total colour change (dE) is 17%. It is expected that the coating system has the potential application in paint or ink.
Key words: Carbon-Polyol; Palm Kernal Cake (PKC); Colourant; Lightfast; Coating

Keywords


Carbon-Polyol; Palm Kernal Cake (PKC); Colourant; Lightfast; Coating

References


Havlinova, B.; Babiakova, D.; Brezova, V.; Durovic, M.; Novotna, M. and Belanyia, F. (2002). The stability of offset inks on paper upon ageing. Dyes and Pigment, (54),173-188.

Moura, J.; Oliveira-Campos, A. and Griffith, J. (1997). Dyes and Polymers, (33-3), 173-196.

Pugh, S. and Guthrie., J.; (2002). Some characteristics of pigments that affect the kinetics of fading of prints made from water-based liquid Ink formulations. Dyes and Polymers (55) 109-121.

Tucks, A and Beck, H.; (2005) The photochromic effect of bismuth vanadate pigments. Part I:Synthesis, characterization and lightfastness of pigment coatings Solid State Chemistry (178) 1145-1156.

Klemchuk, P. (1983); Influence of pigments on the light stability of polymers: A critical review Polymer Photochemistry. (3) 11-27.

Dharmesh H.; Dalwadi, K.; Canet, C.; Roye, N. and Hedman, K.; (2005) Application Note: American Laboratory

Havlinova, B.; Hornakova, L.; Brezova, V.; Liptakova, Z.; Kindernay, J. and Jancovicova, V.; (2000) Ink receptivity on paper - characterization of paper materials. Colloids and Surfaces A: Physicochemical and Engineering Aspects (168) 251-259.

Chang, S.-T. and Chou, P.-L. (1999) Photo-discoloration of UV-curable acrylic coatings and the underlying wood. Polymer Degradation and Stability (63) 435-439.

DelaCaba, K.; Guerrero, P.; DelRio, M. and Mondragon, I. (2006) Weathering Behaviour of Wood-faced Construction Materials Construction and Building Materials (21) 1288-1294.

Chang, S.-T. and Chang, H.-T. (2001) Comparisons of the photostability of esteri®ed wood. Polymer Degradation and Stability (71) 261-266.




DOI: http://dx.doi.org/10.3968/j.ans.1715787020110401.003

DOI (PDF): http://dx.doi.org/10.3968/g1777

DOI (indexed/included/archived): http://dx.doi.org/10.3968/g4690

Refbacks

  • There are currently no refbacks.


Copyright (c)



Share us to:   

Reminder

How to do online submission to another Journal?

If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.

We only use the following emails to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
[email protected]; [email protected]; [email protected]
[email protected];[email protected]

 Articles published in Advances in Natural Science are licensed under Creative Commons Attribution 4.0 (CC-BY).

 ADVANCES IN NATURAL SCIENCE Editorial Office

Address: 1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net; Http://www.cscanada.org
E-mail:[email protected]; [email protected]

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures