Stress Analysis of the Integrity of Casing-Cement Ring-Structural Consolidation Body by Volume Fracturing
Abstract
For unconventional oil and gas reservoirs, the main body at home and abroad adopts segmented fracturing technology for cemented well completion bridge plugs, and the application ratio accounts for more than 85%. In order to improve the development effect of the tight oil and gas reservoirs in the Ordos Basin and increase the output of single wells, the horizontal wells in the Sulige tight gas reservoir adopt casing cementing well completion + bridge plug fracturing. The integrity between the casing-cement ring and the formation consolidation body is the precondition for ensuring the effectiveness of the segmented fracturing closure and the transformation effect. In this paper, the wellbore is subjected to alternating pressure when the volume of horizontal wells is compressed. By analyzing the force of the casing-cement-soil consolidated body and the temperature and casing internal pressure, the calculated relationship between the force of the consolidated body and the displacement of the first and second cemented surfaces was obtained. It provides an important reference for guiding the on-site construction design and follow-up research.
Keywords
Full Text:
PDFReferences
Hughes, D. C. (1985). Pore structure and permeability of hardened cement paste. Magazine of Concrete Research，37(133), 227-233.
[2] Christensen, R. M., & Lo, K. H. (1979). Solutions for Effective Shear Properties in Three Phase Sphereand Cylinder Models. Journal of the Mechanicss and Sphysics of Solids，27(4), 315-330.
[3] Yin, Y. Q., Li, Z. M., & Zhang, G. Q. (2004). Analysis and Research on Casing Load in Shan-varying Formation. Rock Mechanics and Engineering Journal, 23(14), 2381- 2354.
[4] Fang, J., Gu, Y. H., & Mi, F. Z. (1999). Analysis of Casing Extrusion Failure Value Under Non-Uniform Load. Petroleum Machinery, 27(7), 34 - 37.
[5] Chen, P. (2011). A discussion of Three Damage Criteria for Tresca, Mises and Mohr-Coulomb. Power Survey Design, (1), 15-17.
[6] Chen, X. P. (2016). Study on the Ultimate Bearing Capacity of Rock Foundation Based on Molar Basis Criteria. Underground Space and Engineering Journal, (S1), 95-99.
[7] Wang, B. (2015). Analysis of structural integrity of cement ring in non-uniform ground stress. (Master’s thesis) Available from Northeast Petroleum University.
DOI: http://dx.doi.org/10.3968/10411
Refbacks
- There are currently no refbacks.
Copyright (c) 2018 Hongjun LU
This work is licensed under a Creative Commons Attribution 4.0 International License.
Share us to: 
Reminder
- How to do online submission to another Journal?
- If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:
1. Register yourself in Journal B as an Author
- Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.
2. Submission
- Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.
We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
[email protected]; [email protected]; [email protected]
Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY).
ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office
Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.
Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:[email protected]; [email protected]
Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures 
