The In-Situ Stress Analysis of Casing Damage Wells in the Sixth Middle District Based on Kriging Interpolation Method

Wei LI, Yue LI, Zhichao ZHANG, Ping FANG, Weiguo SUN

Abstract


Casing damage is a common engineering problem, the causes of which mainly include two aspects: geological factors and engineering factors. In this paper, the application of the data of logging and hydraulic fracturing gives the calculation model of stress in three directions in the sixth middle district, and have an interpolation calculation on the in-situ stress data in the casing damage wells based on the Kriging interpolation method, and then have a study on the casing damage problems of the sixth middle district in Karamay oil field from the perspective of the in-situ stress. The results show that: the triangular nose anticlinal structure of the sixth middle district which is influenced by tectonic stress obviously is typical non-uniform loading zone; the horizontal stress is the biggest, the ratio of the two horizontal stress is 1.58, which is the major cause of the casing diameter shrinkage. According to the characteristics of the horizontal stress which is too big and the non-uniform load, it is proposed to abandon the conventional design methods of casing string in uniform load, using the non-uniform loading conditions to design, which lays the foundation for secure and stable development of the sixth middle district reservoir.


Keywords


Oil field development; Casing damage; In-situ stress; Kriging method; Geometric modeling

Full Text:

PDF

References


[1] Zhou, Y., Zhang, X. W., & Sun, H. G. (2005). Casing failure mechanism and preventive technology. Special Oil & Gas Reservoirs, 3, 79-82+111.

[2] Fang, Y. J., Guo, W. F., & Zhang, Y. J. (2006). Casing failure mechanism analysis and prevention measures. Special Oil & Gas Reservoirs, 4, 78-80+109.

[3] Ge, X. R. (1993). Study on the tunnel axial deformation mechanism and numerical simulation of three-dimensional finite element method. Xi’an, China: Xi’an Mining Institute of Architectural Engineering Department, Tsinghua Hydropower System.

[4] Fredrich, J. T. (1998). Reservoir compaction, surface subsidence and case damage. Journal of Petroleum Technology, 68-70.

[5] Walas, S. M. (1988). Chemical process equipment. Amsterdam, Netherlands: Butterworth Publishers.

[6] Liu, Y. S., Bai, J. Z., & Zhou, Y. H. (1995). Considering the mud density which keeps the wellbore stable when the wellbore rock is damaged. Journal of Petroleum, 3, 123-128.

[7] Yu, Z. H., Tan, D. K., & Zheng, C. L. (2008). Calculation of casing stress of steam flooding wells in block Qi 40. Special Oil & Gas Reservoirs, 1, 99-102+110.

[8] Lian, Z. H., Zhao, G. Z., & Zhang, X. P. (1995). Computer simulation analysis of the casing stress problems in space. Journal of Southwest Petroleum Institute, 3, 101-108.

[9] Huang, Q. Y., Liu, D., & Ye, N. (2013). Dolomite reservoir characteristics and diagenesis of Cambrian in the Tarim basin. Journal of Northeast Petroleum University, 37(6), 63-74.

[10] Chen, Q. X. (1998). Analysis of rock mechanics and tectonic stress field: The second section of method and practice of geomechanics. Beijing: Geological Publishing House.

[11] De Kemp, E. A. (2000). 3D visualization of structural field data: Examples from the Archean Caopatina Formation, Abitibi Green Stone Belt, Quebec, Canada. Computers & Geosciences, 26(5), 509-530.

[12] Turner, A. K. (2006). Challenges and trends for geological modeling and visualization. Bulletin of Engineering Geology and the Environment, 65(2), 109-127.




DOI: http://dx.doi.org/10.3968/7932

Refbacks

  • There are currently no refbacks.


Copyright (c) 2016 Advances in Petroleum Exploration and Development



Share us to:   

Reminder

  • How to do online submission to another Journal?
  • If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

  • Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

  • Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
[email protected]; [email protected]; [email protected]

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY). 

ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:[email protected];  [email protected]

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures