Study on Matching Ability Between Cement Particle Size and Permeability in the Process of Oil Reservoir Plugging

Qingjie ZHANG, Jianguang WEI, Guojun SUN, Liyang JIN, Pengjun GUAN

Abstract


In order to satisfy the plugging demands of injecting the cement plugging agent into reservoirs with different radial depths, the technical studies of cement particle size optimization should be conducted. Through indoor experiment, the relationship between cement particle size and permeability was investigated by both macroscopic and microcosmic analysis. It is observed that the reservoirs which permeabilities are within 50~200mD are matching well with the cement agents which particle sizes are less than 5μm. And the permeabilities within 200~400mD are matching well with the cement agents which particle sizes are within 5~10μm, the permeabilities within 400~700mD are matching well with the cement agents which particle sizes are within 10~20μm, the permeabilities are above 700mD are matching well with the cement agents which particle sizes are more than 20μm. The plugging success rates of all the matching experiments are exceeding 90%. This research result is important to direct the plugging operation in the field.

Key words: Plugging off and channeling prevention; Cement particle size; Permeability; Matching relationship; Experimental study


Keywords


Plugging off and channeling prevention; Cement particle size; Permeability; Matching relationship; Experimental study

Full Text:

PDF

References


[1] Dalrymple, E.D., Dahl, J.A., East, L.E., & McKown, K.W. (1992). A Selective Water Control Process. Casper, Wyoming: SPE Rocky Mountain Regional Meeting.

[2] David, K., & Prentice, C. (1992). Computer Simulation Improves Remedial Cementing Success. World Oil, 1, 59-62.

[3] Bahramian, Y., Movahedinia, A., & Rasaei, M. R. (2007). Prediction of Slurry Permeability, K, Using Static Gel Strength, SGS, Fluid Loss Value and Particle Size Distribution. Oklahoma City, Oklahoma, U.S.A.: Production and Operations Symposium.

[4] Yang, W. H., Ge, H. J., & Liu, S. Q., et al. (2010). Experimental Study of the Matching Ability Between Inorganic Particles Plugging Agent and Formation Pore Constriction. Oil Drilling & Production Technology, 11(6), 93-96.




DOI: http://dx.doi.org/10.3968/j.aped.1925543820120301.161

Refbacks

  • There are currently no refbacks.


Copyright (c)



Share us to:   

Reminder

  • How to do online submission to another Journal?
  • If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

  • Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

  • Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
[email protected]; [email protected]; [email protected]

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY). 

ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:[email protected];  [email protected]

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures