The Research on Weak Alkali ASP Compound Flooding System for Shengli Heavy Oil

CHEN Ting, ZHANG Guicai, GE Jijiang, YANG Hong

Abstract


In order to avoid the disadvantages caused by strong alkali used in enhanced oil recovery, sodium metaborate was compounded with nonionic surfactant nonylphenol polyoxyethlene polyoxypropylene ether sulfate and hydrolyzed polyacrylamide for the first time as a chemical displacement agent for Shengli heavy oil. The interfacial tension between crude oil and aqueous solutions, emulsification tests, microscopic displacement properties and sandpack flooding were investigated. It can be observed that the interfacial tension was reduced to ultra-low value due to the synergy effect between the weak alkali and surfactant. The microscopic displacement tests showed that there was an optimum surfactant concentration for alkali-surfactant flooding system to obtain larger sweep efficiency. And the recovery efficiency can be further increased by addition of hydrolyzed polyacrylamide. The oil recovery increased with the increasing of hydrolyzed polyacrylamide concentration. The newly designed compound system was proven to have the application potential on pilot tests.

Key words: Weak alkali; Sodium metaborate; Compound flooding system; Nonylphenol polyoxyethlene polyoxypropylene ether sulfate; Heavy oil


Keywords


Weak alkali; Sodium metaborate; Compound flooding system; Nonylphenol polyoxyethlene polyoxypropylene ether sulfate; Heavy oil

Full Text:

PDF

References


[1] Liu, Q., Dong, M. Z., Yue, X. A., & Hou, J.R. (2006). Synergy of Alkali and Surfactant in Emulsification of Heavy Oil in Brine. Colloids and Surfaces A, 273(1-3), 219-228.

[2] Liu, Q., Dong, M. Z., Ma, S. Z., & Tu, Y. (2007). Surfactant Enhanced Alkaline Flooding for Western Canadian Heavy Oil Recovery. Colloids and Surfaces A, 293(1-3), 63-71.

[3] Dong, M. Z., Ma, S. Z., & Liu, Q. (2009). Enhanced Heavy Oil Recovery Through Interfacial Instability: A Study of Chemical Flooding for Brintnell Heavy Oil. Fuel, 88(6), 1049-1056.

[4] Wang, H. Y., Cao, X. L., Zhang, J. C., & Zhang, A. M. (2009). Development and Application of Dilute Surfactant–Polymer Fooding System for Shengli Oilfield. Journal of Petroleum Science and Engineering, 65(1-2), 45-50.

[5] Gong, H. J., Xia, X., Xu, G. Y., & Wang, Y. J. (2008). The Dynamic Interfacial Tension Between HPAM/C17H33COONa Mixed Solution and Crude Oil in the Presence of Sodium Halide. Colloids and Surfaces A, 317(1-3), 522-527.

[6] Gong, H. J., Xu, G. Y., Zhu, Y. Y., Wang, Y. J., Wu, D., Niu, M. Y., Wang, L. S., Guo, H. J., & Wang, H. B. (2009). Influencing Factors on the Properties of Complex Systems Consisting of Hydrolyzed Polyacrylamide/Triton X-100/Cetyl Trimethylammonium Bromide: Viscosity and Dynamic Interfacial Tension Studies. Energy Fuels, 23(1), 300-305.

[7] Li, G. Z., Mu, J. H., Li, Y., & Yuan, S. L. (2000). An Experimental Study on Alkaline/Surfactant/Polymer Fooding Systems Using Nature Mixed Carboxylate. Colloids and Surfaces A, 173(1-3), 219-229.

[8] Zhu, Y. Y., Hou, Q. F., Yuan, H., Wang, Z., & Wu, J. (2010). Synthesis and Properties of Petroleum Sulfonates for Weak Alkali ASP/Alkali-free SP Combination Flooding. Paper SPE133419 Presented at the SPE Asia Pacific Oil & Gas Conference and Exhibition, Brisbane, Queensland, October, 1-9.

[9] Kokal, S. & Aramco, S. (2002). Crude-Oil Emulsions: A State-of-the-Art Review. SPE Production & Facilities, 20(1), 5-13.

[10] Ding, B. D., Zhang, G. C., Ge, J. J., & Liu, X. L. (2010). Research on Mechanisms of Alkaline Flooding for Heavy Oil. Energy Fuels, 24(12), 6346-6352.

[11] Pei, H. H., Zhang, G. C., Ge, J. J., Tang, M. G., & Zheng, Y. F. (2012). Comparative Effectiveness of Alkaline Flooding and Alkaline−Surfactant Flooding for Improved Heavy-Oil Recovery. Energy Fuels, 26(5), 2911-2919.




DOI: http://dx.doi.org/10.3968/j.aped.1925543820130501.1123

Refbacks

  • There are currently no refbacks.


Copyright (c)



Share us to:   

Reminder

  • How to do online submission to another Journal?
  • If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

  • Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

  • Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
[email protected]; [email protected]; [email protected]

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY). 

ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:[email protected];  [email protected]

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures